Welcome To b2b168.com, Join Free | Sign In 中文(简体) | 中文(繁體) | Francés |Español |Deutsch |Pусский | | No.8379275
- Product Categories
- Friendly Links
|Information Name:||Panasonic Inverter BFV00042GK supply|
|Specifications:||Panasonic Inverter BFV00042GK|
|Detailed Product Description：|
Wuhan, the more Bentazone downconverter BFV00042GK special Wuhan Panasonic Panasonic Inverter Monopoly (Japan) BFV00042GK BFV00072G BFV00074 BFV00152G BFV00154 BFV00224 BFV00374 BFV0C0042G BFV0C0072G BFV0C0074 BFV0C0154 BFV0C0222G BFV0C0224 BFV0C0374 BFV80554Z BFV80754Z BFV81104Z BFV81904Z BFV82204Z BFV83004Z VF 0 Series Inverter ◆ In order to meet the needs of various types of small machines, the most similar products to achieve the goal of miniaturization ◆ 0.2KW and 0.4KW type, width 78mm × high 110mm, the volume is only Panasonic products over 40% to 50% ◆ frequency can be adjusted directly with the PLC, the PLC receives direct and control the motor frequency PWM signal ◆ FM with a new design of the potentiometer, with the operating panel can easily operate forward / reverse ◆ built-in 8-speed control braking (0.2KW without braking), the retry function, etc. VF0 ultra-small inverter rated: Order no regenerative braking with regenerative braking BFV00022D BFV00042D BFV00072D BFV00152D BFV00042G BFV00072G BFV00152G Standards applicable to motor output (KW) 0.2 0.4 0.75 1.5 0.4 0.75 1.5 Rated output Rated Capacity (kVA) a) 0.6 1.0 1.4 2.8 1.0 1.4 2.8 Rated current (A) b) 1.4 2.4 3.6 7.0 2.4 3.6 7.0 Rated voltage 3-phase 200 ~ 230V AC (power supply voltage ratio) Overload current rating of 150% of rated output current for 1 minute Input Power phase. The voltage. Frequency single-phase 200 ~ 230V AC 50/60Hz Change the value of the rated input voltage AC voltage to allow +10%, -15% Change the value of the rated input frequency allows the frequency of + -5% Withstand transient voltage drop over the amount of 165V to run, when the voltage is lower than 165V, the continuous operation 15ms Power Capacity (kVA) c) 0.7 1.2 1.7 3.7 1.2 1.7 3.7 Protection structure (JEM1030) IP20 shielded (but the main line, the line of control into the line hole, except the Department) Since the self-cooling cold cold cold cold Quality about (Kg) 0.7 0.7 1.2 1.3 0.7 1.2 1.3 Special inventory sales Matsushita (NAIS) inverter: (National level agency) 1 Matsushita Electric Works PLC: FP0 series, FPe series, Fpo series, FP1 series, FP2 series, FP3 series 2, Matsushita Electric Drive: VF0 series, VF-7F series, VF-8X series, VF-8Z series, 3, Matsushita Electric Touch screen: GT01 series, GT10 series, GT30C series, GT30M Series 4, Panasonic Inverter: DV700T series, DV707H series, M1D series, M1G series, M1X series, M2X series, 5, Panasonic servo motor and drive: MINAS A series of small inertia, MINAS A series of inertia, MINAS A series of large inertia 6, a small gear motor with low noise Panasonic: NEWG series, G series, supporting special mahjong machine motor Performance Description: Matsushita Electric VF0 series inverter ◆ In order to meet the needs of various types of small machines, the most similar products to achieve the goal of miniaturization ◆ 0.2KW and 0.4KW type, width 78mm × high 110mm, the volume is only Panasonic products over 40% to 50% ◆ frequency can be adjusted directly with the PLC, the PLC receives direct and control the motor frequency PWM signal ◆ FM with a new design of the potentiometer, with the operating panel can easily operate forward / reverse ◆ built-in 8-speed control braking (0.2KW without braking), the retry function, etc. Matsushita VF-7F VF-8Z series inverter ◆ frequency across the characteristics of connected equipment and prevents the drive because of resonance caused by vibration. ◆ Set the maximum output voltage, the inverter output voltage can be AVR (automatic voltage regulator) to adjust. ◆ Jog, choose self-control or external control Jog, acceleration / deceleration time can be set separately. ◆ low running smooth, unique PWM control method to ensure the smooth running at low frequency inverter, the torque is almost unaffected. ◆ overload protection function in a variety of operating conditions to provide adequate motor overload protection. ◆ instantaneous power and then start the performance, or system under load conditions and set different starting methods. ■ with the use of PLC as NAIS, the applicability of the series inverter will be stronger, better. Special supply Panasonic servo drive Technical Specifications Model M2X044BSA M21X084BSA M2X154BSA M2X224BSA M2X374BSA Amount Set Lose The motor (KW) * 1 0.4 0.75 1.5 2.2 3.7 Capacity (KVA) * 2 1.3 2.0 3.0 4.4 7.2 Output Current (A) 1.5 2.5 3.7 5.5 9.0 Rated output voltage (V) * 3-phase AC380 --- 460V Electricity AC380 --- 460V three-phase source voltage Frequency 50/60Hz Allows the voltage change -15%, +10% Allows the frequency change ± 5% Control System Square Type Low-noise sine wave PWM control mode Output frequency range 0.5 ~ 400Hz (from 0.5Hz start, stop) Frequency accuracy of ± 5% (25 ° C ± 10 ° C) Decomposition performance digital frequency setting: 0.01Hz; simulation: Setting frequency range / 1000Hz (minimum 0.05Hz) Frequency setting signal DC0 ~ +5 V, 0 ~ +10 V, 4 ~ 20mA Voltage / frequency characteristics of the basic frequency: 30 ~ 400Hz (1Hz steps), there is way to reduce the torque Load current rating of 150% is too large / 1 minute Regenerative braking torque of 150% or more (short) 50% (short) Braking start frequency of DC braking, the braking action time, the amount of adjustable brake Acceleration and deceleration time of 0 seconds -3600 seconds (0-3 seconds: 0.01 seconds, 3-step 10 seconds: 0.1 seconds steps, 10 seconds: 1 second steps) * Changes in the 50Hz time, you can set four types of acceleration and deceleration. Slow frequency range 0 ~ 30Hz 2-speed operation mode, 4-speed, 8 speed, 16 speed Other auto-acceleration, the choice of slip frequency vector control possible, automatic voltage adjustment function, try optional PID function function, RS-485 communication function (just a form of communication), to lock parameters Protection-voltage protection, overcurrent protection, voltage protection is too large, instantaneous power failure, turn off to prevent, large negative Heda limit (current limiter), the load is too large cut (electric heater), and then start to prevent the restoration of self-diagnosis disconnect (disconnect the memory of the past five reasons) Environmental conditions Ambient temperature -10 ° C to +50 ° C (not frozen); over 40 ° C when the ventilation position and relieved the rubber baffle Humidity below 90% relative humidity (no condensation) Storage temperature -20-65 ° C (not frozen) * 1 (* 1 This is the temperature of the transport in a short time) Storage Humidity 90% RH or less (no condensation) Save the structure IP40 (fully closed type) (with air casing) Vibration 5.9m/s2 the following (10 ~ 60Hz) The following elevation of 1000m Cooling from the cold (not equipped with fan) to force cold air Weight (kg) 2.1 2.2 * 1 that the Company applicable to three-phase motor induction motor (4) of the situation. If applicable, other motors, please select the rated speed controller within. * 2 Output capacity at rated output voltage of 460V of the situation. * 3 Output voltage can not exceed the supply voltage.